织梦CMS - 轻松建站从此开始!

hollinlighting

无法在这个位置找到: banner.htm
无法在这个位置找到: ct.htm
Position: Home > Support >

The common technical parameters for LED tube light

The common technical parameters for LED tube light is as following:

(1) Luminous Energy: luminous energy is the perceived energy of light. This is cometiomes also called the quality of light.
(2) Luminous flux(lm): luminous flux or luminous power is the measure of the perceived power of light. The SI unit of luminous flux is the lumen(lm). One lumen is defined as the luminous flux of light produced by a light source that emits one candela of luminous intensity over a solid angle of one steradian.
(3) Luminous Intensity(cd): luminous intensity is a measure of the wavelength-weighted power emitted by a light sources in a particular direction per unit solid angle, based on the luminosity function, a standardized model of the sensitivity of the human eye. The SI unit of luminous intensity is the candela(cd).
(4) Luminance(cd/m2): luminance is a photo metric measure of the luminous intensity per unit area of light travelling in a given direction. It describes the amount of light that passes through or is emitted from a particular area, and falls with a given solid angle. The SI unit for luminance is candela per square meter cd/m2.
(5) Luminous Efficacy (lm/W): Luminous efficacy is a figure of merit for light sources. It is the ratio of luminous flux (in lumens) to power (usually measured in watts). As most commonly used, it is the ratio of luminous flux emitted from a light sources to the electric power consumed by the source, and thus describes how well the source provides visible light from a given amount of electricity. This is also referred to as luminous efficacy of a source. In SI, luminous efficacy has units of lumens per watt (lm/w).
(6) Illuminance(lx): illuminance is used in photometry as a measure of the apparent intensity of light hitting or passing through a surface. It is analogous to the radiometric unit watts per square meter, but with the power at each wavelength weighted according to the luminosity function, a standardized model of human brightness perception. The SI unit of illuminance is lux(lx). Lux is derived unit based on lumen, and lumen is based on candela.

Related Articles

无法在这个位置找到: emailtous.htm

More Information
TEL:+86-760-22115895 FAX:+86-760-22115896 Moblie:+86-13316564222